Union Pacific 1505 Specific Features:

• Frame Mounted Bell
• Lift-Out Cab Base Doors With Stiffening Ribs On Engineer’s Side
• Lift-Out Smooth Cab Base Door On Fireman’s Side
• GP40-2 Lettering
• Cut Levers With Extended Handles, Front Cut Lever Is V-Shaped, Rear Cut Lever Is Straight
• 3600 Gallon Fuel Tank With Snyder Fuel Fillers, Single Vertical Fuel Gauges, Blanked Round Fuel Gauge On Engineer’s Side Only, And Tank Top Fuel Gauges
• Five Speed Recorders: One On The Second Axle On The Engineer’s Side, One On Every Axle On The Fireman’s Side
• 4 Tall Jack Pads, 2 Per Side
• Vapor Air Conditioner
• Empty Antenna Ground Plane
• Center Cap Grills Over All Fans

Union Pacific Road Specific Features:

• Era: Mid-2010s To Present
• Accurate Union Pacific Armour Yellow Paint Scheme
• LED-Illuminated Headlights
• LED-Illuminated Number Boards
• LED-Illuminated Step Lights
• LED-Illuminated Walkway Lights
• LED-Illuminated Truck Lights
• LED-Illuminated Ditch Lights, Arranged Correctly For Each Unit Number
• Dynamic Brake Blister (Early Short Forward Taper) With 10-Blade Fan And Dynamic Brake Vent
• Nathan K3LA 3-Chime Airhorn On A Stand, Mounted Between The First And Second Radiator Fans On The Fireman’s Side
• Standard EMD Cab Sunshades
• Prototypically Appropriate Arrangement Of Rear View Mirrors And Wind Deflectors On Cab Sides
• Modified Raised Cab Doors
• Straight Nose Grab Irons
• 81 Inch Low Short Hood With Ratchet Handbrake
• Nose Toilet Vent
• Blanking Plates Over Nose And Cab Louvers
• UP Large Snowplow With Grab Irons On Front Pilot Plate, Spare Knuckle Holders On Rear Pilot Plate
• Late “Zig-Zag” Pilot Plates, As Modified By UP
• Low Clearance Step Wells
• 3-Hose MU Hose Clusters With Silver Gladhands
• MU And Dummy MU Pads Are Accurate To Each Road Number
• Pivoting Front And Rear Drop Steps
• “Chicken Wire” Radiator Intake Grills With Etched Diamond Pattern Mesh Screens
• Mix Of Etched Open Fan Grills And Etched Fan Grills With Center Caps, As Arranged Correctly For Each Unit Number
• Large Square ECAFB Box
• AEI Tags
• Early Smooth Blower Duct With Added Up Blower Box
• Rear Number Boards Removed As Per Prototype
• Additional Grab Irons On Forward Number Board Housing As Per Prototype
• Air Dryer Behind Fuel Tank On Engineer’s Side

GP40 General Features:

• Detailed And Painted Cab Interior, Complete With Separate Front Wall, Floor, Back Wall, Control Stand, And Seating
• Sliding Cab Windows
• New: Cab Interior Sunshades
• Highly Detailed Blomberg Trucks Complete With Traction Motor Detail
• Three (3) Detailed 9 Blade Radiator Fans
• Highly Detailed Underframe Piping, Plumbing, Cabling, And Salem Air Filters
• Prototypical Arrangement Of Sand Lines, Which Flex With Truck Movement
• Metal Handrails And Plastic Stanchions

General Locomotive Features:

• Fully Assembled
• Multiple Road Numbers
• Countless Factory Applied Detail Parts, Such As Grab Irons, Steps, Lifting Rings, Air Hoses, Windshield Wipers, Etc.
• Precise And Quiet Slow Speed Control
• Kadee 5 Compatible Metal Couplers
• 5-Pole Skew Wound Motor
• Dual Flywheels
• CNC Machined Wheelsets With RP-25 Contour
• All Wheel Drive
• All Wheel Electrical Pickup
• Directional LED Headlights
• Quality Packaging Safely Stores Model
• 18 Inch Minimum Radius

DCC Sound Equipped Models Also Feature:

• All Fans On Your Model Function Prototypically With Micro-Processor Controlled Tru-Fans 
• Onboard DCC Decoder With SoundTraxx Tsunami2 Sound
• Onboard CurrentKeepers

DCC Sound Ready Models Also Feature:

• 21-Pin DCC Ready Connector

Looking for more Class One Model Works EMD GP-40 Diesel Locomotives? Click here!