Features:

• Digitrax SoundFX v3 Sound

Your locomotives will sound “in scale” like the real thing with SoundFX v3

Customizable with 16, 12 or 8 bit .wav file sounds

Works with all SoundFX 8 and 16 bit sound projects

Up to 6 simultaneous voices

Download sounds with a Digitrax Sound Programmer and SoundLoader II

16 megabit On Board Sound Memory

Cam input-synchronized steam-chuff option for steam locos

Scalable Speed Stabilization configured for sound operation

• Wired connections for track, motor and function control.

• High current motor drive capacity. Suitable for; HO/S/O and G scale loco-motives with total motor(s) stall current up to 4 amps

• Series 7 Enhanced Decoder Features.

• Firmware may be user updated using a Digitrax USB equipped Command Station with Sound Loader in decoder IPL mode.

• Factory 8 Ohm 16 x 26 x 9 mm box speaker on 10-pin plug design makes sound installation quick and easy.

• Smart Power Management- no more booster or programmer shutdowns!

• Program CVs using any Digitrax Compatible Control system without having to buy any extra equipment.

• Works with PX112-10 Power Extender, up to its 15V maximum on track.

• Digitrax FX3 Functions-Control lights and functions for prototypical lighting effects and on/off control.

• Configurable FX3 Pulse Function available on all function outputs.

• Digitrax LocoMotion System – Lets your trains run like the real thing!

• DCC Compatible. 2 Digit and 4 Digit Addressing.

• Basic, Advanced & UniVersal Consisting.

• SuperSonic motor drive for silent operation.

• Adjustable Over temperature shutdown to protect install.

• Flat face allows Heatsink installation option to remove heat, allowing higher ambient temps and current loads before shutdown.

• Direct and Operations Mode programming.

• Decoder Reset by CV8, with or without speed table reset.

• Transponder Equipped ready for transponding ID on your layout.

• Power-on Motor Isolation Protection, helps prevent damage to your decoder.

• FCC Part 15, Class B RFI compliant.

• Operates on DCC track voltage 9V minimum. to 22V maximum.

Looking for more Digitrax Decoders? Click Here!