ANE Models - A003 - Smart Switch Set - This is the basic DCC setup. Servos are controlled by toggle switches or user supplied push buttons or by included stationary decoder (SKU 136-A003)
ANE Smart Switch Set A003

Consists of:
â–º AP014 Smart Switch Board
â–º 4 Servo Motors
â–º AP015 SmartSwitch hand control board
â–º Cables and mounting hardware
â–º AP004 Stationary Decoder
Product Features
- Easy to install.
- Built-in drilling template.
- Dual operation modes: Dispatch mode and Switch mode. (with toggle switch or push button switch).
- Remote encoding technique: Improved user friendly fully adjustable “hand throttle”.
- * Our hand throttle can adjust/change the switching speeds of a servo, the switching angles of a servo, the operation modes and the reset function.
- Two LED displays in the hand throttle.
- Improved servo silent function for analog servos.
- Virtual center line for easy trouble free mounting.
- Minimal structural interference---the servo and its mounting linkage are compact in size.
- More mounting possibilities---traditional, off-center or horizontal rotary installation. The servo can be installed either below the road bed or next to the turnout.
- Adjustable servo speed and position through the programming features in the SmartSwitchTM control board to give you ultimate control for pressing the point rails against the stock rails.
- Each control board can control up to four turnouts.
- Can simultaneously control one or up to four servos by using one toggle switch or push button.
- Remember the turnout positions when power is off.
- Provides various settings for indication and signal light.
- Low current draw. 9V is the minimum requirement for the input power supply.
- DCC friendly--- the SmartSwitchTM stationary decoder supports a full range of DCC accessory addresses (1-2048) and offers simple mainline address programming.
- The decoder also supports route control features from major DCC manufacturers.
- The SmartFrogTM has easy DCC friendly power route wiring. The precise polarity switch when both the point rails are not in contact with the stock rails allows for zero chance of short circuit.
The SmartSwitchTM gives you the ultimate flexibility.
For more technical information click Here

$101.95 US
Country of Origin: Taiwan
Something else you might be interested in: