Super Empire Builder Xtra Duplex Radio Equipped
• Everything you need to get started in Advanced Digitrax Command Control for a reasonable price.
• Super Empire Builder Xtra is perfect for most home and club layouts.
• It offers excellent speed control, prototypical consisting, the full range of programming features and much more.
• Build your railroad empire with Super Empire Builder Xtra.

Set Includes:
• DB150 Command Station/Booster With Intelligent AutoReverse
• DT402D Super LocoNet Throttle
• UR92 Duplex Tranceiver
• One LT1 LocoNet Cable & Decoder Test Kit
• Complete Manual Set : Super Empire Builder Xtra Manual and Decoder Manual
Note: Digitrax Starter Sets do not include mobile decoders or power supplies.

Requires PS515 power supply.

The DT402D Super Throttle & DB150 Command Station Offer
• User interface makes DCC simple.
• Dual throttle controls.
• Full numeric key pad.
• Simplified 4 digit addressing.
• Easy address browsing and selection.
• User friendly text messages to guide you.
• Click encoders for smooth speed control.
• Control 29 functions - F0 through F28.
• Multi-line LCD display puts all the information you need right at your fingertips.
• Infra-ready out of the box. Radio equipped version also available.
• Ready for transponding and cab signaling.
• Simplified throttle option setup.

Plenty of Capacity for Most Layouts
• Run up to 22 addresses at the same time on your system.
• Run up to 22 throttles at the same time on your system.

Over 9000 Locomotive Addresses
• Address 00 for operation of one or more locos without decoders
• Two Digit Addressing is easy to use. (Address 01-127)
• Four Digit Addressing-use the road number of your engines as their addresses. (Address 0128-9000+).
5 Amps of Power to run more trains.
• Selectable scale voltage for safe operation in ALL scales.

Function Control
• Control 29 functions-F0 through F28.
• Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.
• Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder).
Decoder Programming
• Built in programmer that can write all CVs.
• Supports Paged programming (Digitrax preferred method). Also supports direct & register mode programming.
• Operations mode programming can be used to program decoders on the layout.

Stationary Decoders, Turnout Control & Turnout Position Reporting
• Access to stationary decoder control for turnouts and other devices.
• DT400 reports turnout position based on last command sent.
• Control 999 stationary decoder addresses.
Consisting
• Universal consisting, Digitrax preferred method. ALL locos can be consisted, even analog locos.
• Advanced consisting, allows only advanced consist capable mobile decoders.
• Basic consisting, program decoders to run on same address.
UP5 Universal Panel
• Makes LocoNet hook up simple!
• 2 LocoNet jacks for hooking up your LocoNet network.
• 3 throttle jacks for hooking up throttles and other non-RailSync devices.
• Included with non-radio sets. Radio equipped sets include UR91 radio receiver.

Expandability with Digitrax LocoNet
• Use Super Empire Builder as a starting point, then add components.
• Use Super Empire Builder as an expansion set with Digitrax equipment you already have installed.
Super Empire Builder Xtra is more than just a starter set!
• Because all Digitrax Sets are value priced, they are great as expansion sets for existing systems. • So, if you need another booster and throttle, it is a much better deal to buy a set!

DT400D Duplex Super Radio Throttle

* Works with ANY LocoNet compatible system
* Full numeric keypad makes loco selection simple
* Run locomotives with “encoder click” knobs for speed and direction control
* Control light and sound effects functions with the press of a button
* Large LCD display shows locomotive status at a glance
* Built in flashlight for convenience
Full Featured With Support For:
* Duplex Radio operation with UR92
* 29 Functions (F0-F28)
* Convenient step-by-step throttle option set up
* Simplified 4 or 2 digit addressing
*Over 9,000 locomotive decoder addresses
* 999 turnout decoder addresses
* 29 Functions (F0-F28)
* Playable whistle feature on F2
* Decoder programming
* Transponding “Find” feature
* Fast clock display
* Recall feature

Click Here to View Digitrax Video Tutorials