N Scale 1:160, JTC # 537141 KLLM Intermodal  53' High Cube containers.  8-55-5 corrugated sides.  Scheme Specific Tooling - Features New Door style Tooling, per prototype, to accommodate the Logo. Special scheme process printing.

SINCE 1963

KLLM has transported perishable commodities for satisfied customers from coast to coast and is now one of the largest temperature-controlled truckload carriers in the United States.

At KLLM, they offer several transportation service offerings to make a complete package to meet their customers’ needs, including Over the Road, Regional, Dedicated, Intermodal and Logistics Services.

COMPATIBILITY

It is an essential part of Value, and a Key component of JTC's Company Vision.

It adds to the enjoyment of their modeling and purchases. JTC's models feature magnets and connecting pins (IBC), and all of their 20+ container body styles are PIN COMPATIBLE, for easy stacking in all configurations between all body styles. For modelers that means that, yes you can stack JTC's 53', 48, and all Ten types of their 40’ containers on two of their 20 footers.

Features;

• All New Tooling; 8-55-8 corrugated sides

• Different doors and fronts tooled to match prototype photos.

• Scheme specific tooling for vent locations, placard location, lading boxes, GPS units, etc.

• IBC(Inter-Box Connecting pins) in scale ISO 40' locations

• JTC Magnetic connecting system: magnets on bottom & metal top plates

• Detailed printing as per photographs

• Models come in packages of TWO, unless noted otherwise.

• The IBC pins Mate with JTC 40' open top containers with Magnets, JTC 20' containers with Magnets; Atlas 40 container, JTC Flatrack containers, JTC 53' and 48' containers and future Jacksonville Terminal Company containers.

• Compatible with JTC Retro-fit underframe kits to stack M-T and S-T brand containers on top.

N Scale 1:160, JTC # 537103 Priority Logistics 53' High Cube containers.  8-55-5 corrugated sides.  Scheme Specific Tooling -  Features New Door style Tooling, per prototype, to accommodate the Logo.

PLIU 538734 & 538751

Priority Logistics Inc is a full service, asset-based intermodal carrier that has been serving the transportation industry for the past 28 years. Our commitment to high service levels and appreciation towards our customers has led us to a respectable presence in the industry.

Our intermodal division runs in excess of 250 containers, mostly heated, offering daily LTL and full load service from all points within Alberta, BC, Ontario, Quebec and  Washington State. Our 53’ high cube containers run on the CN and CP networks with guaranteed reservations from all 4 provinces.

COMPATIBILITY

It adds to the enjoyment of our modeling and purchases. JTC's models feature magnets and connecting pins (IBC), and all of our 20+ container body styles are PIN COMPATIBLE, for easy stacking in all configurations between all body styles. For modelers that means that, yes you can stack our 53', 48, and all Ten types of our 40’ containers on two of our 20 footers.

Features;

• All New Tooling; 8-55-8 corrugated sides

• Different doors and fronts tooled to match prototype photos.

• Scheme specific tooling for vent locations, placard location, lading boxes, GPS units, etc.

• IBC(Inter-Box Connecting pins) in scale ISO 40' locations

• JTC Magnetic connecting system: magnets on bottom & metal top plates

• Detailed printing as per photographs

• Models come in packages of TWO, unless noted otherwise.

• The IBC pins Mate with JTC 40' open top containers with Magnets, JTC 20' containers with Magnets; Atlas 40 container, JTC Flatrack containers, JTC 53' and 48' containers and future Jacksonville Terminal Company containers.

• Compatible with JTC Retro-fit underframe kits to stack M-T and S-T brand containers on top.

N Scale 1:160, JTC # 537130 Milestone universal patch 53' High Cube containers.  8-55-5 corrugated sides.  Scheme Specific Tooling -  Features New Door style Tooling, per prototype, to accommodate the Logo.

MILESTONE, headquartered in St. Charles, Missouri, with an operational center of excellence in Chicago, Illinois and approximately 65+ locations across the United States. With a combined fleet of approximately 85,000 chassis, trailers and domestic containers – Milestone is one of the nation’s most comprehensive lessors of transportation equipment. For over 20 years, they have provided asset management services, financing, maintenance and more to customers that describe us as flexible, trustworthy and customer-centric.

COMPATIBILITY

It is an essential part of Value, and a Key component of their Company Vision.

It adds to the enjoyment of their modeling and purchases. JTC's models feature magnets and connecting pins (IBC), and all of their 20+ container body styles are PIN COMPATIBLE, for easy stacking in all configurations between all body styles. For modelers that means that, yes you can stack their 53', 48, and all Ten types of their 40’ containers on two of their 20 footers.

Features;

• All New Tooling; 8-55-8 corrugated sides

• Different doors and fronts tooled to match prototype photos.

• Scheme specific tooling for vent locations, placard location, lading boxes, GPS units, etc.

• IBC(Inter-Box Connecting pins) in scale ISO 40' locations

• JTC Magnetic connecting system: magnets on bottom & metal top plates

• Detailed printing as per photographs

• Models come in packages of TWO, unless noted otherwise.

• The IBC pins Mate with JTC 40' open top containers with Magnets, JTC 20' containers with Magnets; Atlas 40 container, JTC Flatrack containers, JTC 53' and 48' containers and future Jacksonville Terminal Company containers.

• Compatible with JTC Retro-fit underframe kits to stack M-T and S-T brand containers on top.

N Scale 1:160, JTC # 537132 CP large logo, 53' HIGH CUBE 8-55-8 (3 pack) corrugated containers with stackable Magnetic system. Scheme Specific Details and decorating.

• 10 rib vertical Front with one Hazard placard, and NO document box

• 1-3-1 Doors (parallel handles) with one Hazard placard and NO document box

• Scheme specific sides with one hazard placard and four outer vents

CP Intermodal

With 10 well-located terminals, CP connects major centers across North America with each other and the rest of the world. In North America, they move goods for a wide range of industries.

CP service between Chicago, Toronto and Montreal offers customers a truck-like service with consistent transit, even in short-haul lanes. Their service into Western Canada has the shortest route miles and provides customers with access to growing markets and they offer the fastest service between Vancouver and Minneapolis-St. Paul, Chicago and Detroit with fourth day service, connecting Canada’s Pacific Gateway to the U.S. Customers with highly time-sensitive shipments such as courier packages and perishable products can rely on CP’s transcontinental intermodal service to deliver their shipments quickly and reliably.

Features;

• All New Tooling; 8-55-8 corrugated sides

• Different doors and fronts tooled to match prototype photos.

• IBC(Inter-Box Connecting pins) in scale ISO 40' locations

• JTC Magnetic connecting system: magnets on bottom & metal top plates

• Detailed printing as per photographs

• Models come in packages of TWO, unless noted otherwise.

• The IBC pins Mate with JTC 40' open top containers with Magnets, JTC 20' containers with Magnets; Atlas 40 container, JTC Flatrack containers, JTC 53' and 48' containers and future Jacksonville Terminal Company containers.

• Compatible with JTC Retro-fit underframe kits to stack M-T and S-T brand containers on top.